Get A Quote


To request a quote, please fill out the form below. A representative will respond to you as quickly as possible. Thank you.






Input this code: captcha

Get A
Quote

Dielectric Testing

Ensure that you are in accordance with OSHA and ANSI Standards with Dielectric Testing:

OSHA 1910.67 (c) (3) Standard:
“Electrical tests.” Electrical tests shall be made in conformance with the requirements of ANSI A92.2 – 2001, Section 5.  However, equivalent DC voltage tests may be used in lieu of the AC voltage test specified in A92.2 – 2001.  DC  voltage tests which are approved by the equipment manufacturer or equivalent entity shall be considered an equivalent test for the purpose of this paragraph (c) (3)

ANSI A9.2-2001 Standard:
5.3 Electrical Tests For Insulating Aerial Devices
…5.3.2 Qualification Test
Each insulating aerial device shall be tested in accordance with Section 5.4.2 to insure compliance with the Electrical Qualification requirements as appropriate.  If the aerial device is altered or modified by the installer after the Qualification Test is performed, the original Qualification Test is not valid.

ML Utilities service technicians are trained and certified by the VON Corporation.

dielectric testing

CONTACT US TODAY!

Input this code: captcha

NEED UTILITY SOLUTIONS? CALL US.
877-649-7739

ML Utilities Locations:
Charlotte, NC - 3908 N. Graham St., Charlotte, NC 28206
Baltimore, MD - 4601 Washington Blvd., Baltimore, MD 21227